800.777.7729 (8-5 central)
We Specialize In Batch Powder Coating Systems
p
Wagner Electrostatic Guns
Easy Financing Now Available!

Wagner GM 5000 Electrostatic Guns
  • Flat or round pattern
  • AirSpray or Aircoat/Airless
  • 80kV power supply

FAQ
Frequently Asked Questions


Authorized Distributor

Complete portable units are available for air spray, aircoat , or airless spray applications.
GM 5000 Brochure Specifications and prices Complete units  
Standard Resistance guns are for solvent based paints above 150kOhms resistance.
Low Resistance guns are for solvent based paints like metalics above 50kOhms resistance.
AirSpray Guns for solvent based paints
GM 5000EA
Standard Resistance
Fan Spray 2321000 1.2mm nozzle, "W" AirCap, 25' TwinHose, VM 5000 Controller
Round Spray 2323000 D12 nozzle, D12 AirCap, 25' TwinHose, VM 5000 Controller
GM 5000EA LowR
Low Resistance
Fan Spray 2322000 1.2mm nozzle, "W" AirCap, 25' TwinHose (LowR), VM 5000 Controller
  Round Spray 2324000 D12 nozzle, D12 AirCap, 25' TwinHose (LowR), VM 5000 Controller

AirCoat Guns for solvent based paints
GM 5000 EAC
Standard Resistance
Fan Spray 2326000 11/40 ACF 5000 tip, Red AirCap, 25' TwinHose, VM 5000 Controller
  Round Spray 2328000 Round Nozzle, R 15 Tip, 25' TwinHose, VM 5000 Controller
GM 5000 EAC LowR
Low Resistance
Fan Spray 2327000 11/40 ACF 5000 tip, Red AirCap, 25' TwinHose (LowR), VM 5000 Controller
Round Spray 2329000 Round Nozzle, R 15 Tip, 25' TwinHose (LowR), VM 5000 Controller
GM 5000 Gun VM 5000 Controller
Recipes for pre-defined values for current and voltage can be selected at the gun. The very easy and simple one knob adjustment of all parameters
allows operators to change settings quickly.
LEDs signal conditions are good or need attention
Integrated Voltage on/off switch
The grounding of the gun is monitored by the control unit
for maxiumum safety of the painter. If grounding is interrupted
high voltage is cut off.
  Three recipes of voltage and current can be stored. They
can be activated from the gun or control unit. This change
of pre-defined settings enables the painter to select the
prefered working conditions.
Complete units now come with the GM 5000 gun and VM 5000 Controller
See our complete line of portable Electrostatic Airless/Aircoat/Air Spray units
W
AirCoat atomization:
Greater power - less environmental pollution
Air atomization:
Excellent surface finish - universally usable
A characteristic of the AirCoat process is the distinctly lower paint pressure compared to the Airless process, and the particularly soft and homogeneous spray jet, due to the feed of additional atomizing air. This is provided by the air feed in the air cap, which surrounds the sprayed medium like a sheath. Further advantages are a high coating speed, and low paint mist and overspray.
Summary of the benefits:
  • Excellent surface finish
  • High coating speed
¡  • The reduction of paint mist and overspray
  • Uniform application of paint material
¡  • Soft spray jet with soft run-out at the edges
  • Can also be used for high viscosity materials
  • Reduction of the emissions in accordance with the VOC     guidelines for liquid organic compounds
Main areas of use:
  • Industrial coatings
  • Aircraft industry
  • Agricultural machinery
  • Construction vehicles
The conventional air atomizing process is the classical method of atomizing paints. This type of application meets the highest demands for surface quality and finish. Its universal range of use in industry and also for special applications is what makes this tried-and-tested technology such a success. The characteristic of this process is that the paint is atomized by air. For this the atomizing air flows out through an annular opening in the aircap and can be shaped from a round jet to a flat jet by means of the fan control.
Summary of the benefits:
  • Excellent surface finish
  • Universally usable
  • Simple to handle
  • Reduction of the emissions in accordance with the VOC
    guidelines for liquid organic compounds
Main areas of use:
  • Automobile and commercial vehicle industry
  • Automotive supply industry
  • Agricultural machines
  • Machine tool builders
  • Aircraft industry
  • Plastics painting
agner VM 2000 Wagner VM 200 electrostatic controller Stati-Kit
Spray Tech Systems, Inc. / 1025A Enterprise Ave. / Oklahoma City, OK 73128
info@spraytechsys.com Phone: 800.777.7729 or 405.948.8696 / Fax: 405.948.8160
 Copyright© 2013, Spray Tech Systems, Inc. all rights reserved