800.777.7729 (8-5 central)
We Specialize In Batch Powder Coating Systems
p
Lynx Air Caps & Nozzles

LYNX PRESSURE / SIPHON FEED SPRAY GUN
HVLP AIR CAP AND FLUID NOZZLE CHART
Model Air Cap Pressure
/Siphon		 *MAX
Inlet psi
for HVLP		 Fan Control SCFM
@ Max
Gun Inlet		 Air Cap Ring Fluid Nozzle Needles
(marking on needle)
LI00H
       60-1502 (#2)     31-0205 0.5mm (.020") 40-1100 (100)
          31-0208 0.8mm (.022")
1090 pressure 13 6 21-1001 31-0210 1.0mm (.040")
1092 pressure 15 8 31-0212 1.2mm (.046")
1093 pressure 18 10 31-0213 1.3mm (.052")
1095 pressure 50 22.5 31-0214 1.4mm (.055")
1097 pressure 50 22.5 31-0215 1.5mm (.059")
1195 pressure 50 22.5 Included 31-0216 1.6mm (.063")
1197 pressure 50 22.5 Included 31-0217 1.7mm (.070")
          31-0412 1.2Fmm(.046") 40-1112F (112F)
          31-0414 1.4Fmm(.055") 40-1114F (114F)
          31-0417 1.7Fmm(.070") 40-1117F (117F)
Model Air Cap P/S Inlet psi Fan Control SCFM Ring Fluid Nozzle Needle
L200H
 1028 pressure
29
 60-1502 (#2)
18
 22-1001 32-0611 1.1mm (.042") 40-1211 (211)
1033 pressure
38
18.75
 32-0614 1.4mm (.055") 40-1214 (214)
1057 pressure
50
22
 32-0618 1.8mm (.070") 40-1218 (218)
1100 pressure
37
 60-1503 (#3)
18
 32-0622 2.2mm (.086") 40-1222 (222)
t t
t
 t
t
 32-0211 1.1mm (.042") 40-1211 (211)
1046*** pressure
47
 60-1502 (#2)
22.5
 32-0214 1.4mm (.055") 40-1214 (214)
1083*** pressure
55
 60-1501 (#1)
26
 32-0218 1.8mm (.070") 40-1218 (218)
          32-0222 2.2mm (.086") 40-1222 (222)
Model Air Cap P/S Inlet psi Fan Control SCFM Ring Fluid Nozzle Needle
L300H
 1010 pressure
40**
 60-1501 (#1)
19
 Included 33-0208 .08mm (.022) 40-1308 (308)
1010 pressure
40**
19
 33-0210 1.0mm (.040") 40-1310 (310)
1013 pressure
40**
19
 33-0213 1.3mm (.052") 40-1313 (313)
1014 pressure
40**
19
 33-0214 1.4mm (.055") 40-1314 (314)
1015 pressure
40**
19
 33-0215 1.5mm (.059") 40-1315 (315)
1017 pressure
40**
19
 33-0217 1.7mm (.070") 40-1317 (317)
1019 pressure
40**
19
 33-0219 1.9mm (.075") 40-1319 (319)
1022 pressure
40**
19
 33-0222 2.2mm (.086") 40-1322 (322)
*Note: Air cap test gages are available to confirm HVLP compliance.  
** When using optional gun regulator, inlet pressure changes to 45 psi   *** Must be used with 32-02xx fluid nozzle tips

CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART
Model Air Cap Pressure
/Siphon		 *Suggested
Gun Inlet psi		 Fan Control
SCFM
Air Cap Ring
Fluid Nozzle Needles
(marking on needle)
LI00C
 2163 pressure
50
 60-1500
8
 Included    
2263 pressure
50
14
    
2263-E pressure
50
15
 31-0606 0.6 mm (.022") 40-1107 (107)
2363 pressure
50
13.6
 31-0607 0.7mm (.028")
2166 siphon
50
5
 31-0610 1.0mm (.040") 40-1110 (110)
2266 siphon
50
12
 31-0612 1.2mm (.046")
2266-3 siphon
50
16.2
 31-0613 1.3mm (.052")
2366 siphon
50
12
 31-0615 1.5mm (.059") 40-1115 (115)
2466 siphon
50
15
 31-0618 1.8mm (.070")
2167 pressure
50
14.5
 31-0622 2.2mm (.086") 40-1122 (122)
2267 pressure
50
15
 31-0628 2.8mm (.110") 40-1128 (128)
2168 pressure
50
14
    
Model Air Cap P/S
Inlet psi
 Fan Control
SCFM
Ring
 Fluid Nozzle Needle
L200C
 2030 siphon
50
 60-1500
12
 Included    
2058 p & s
40
6
    
2080 siphon
60
14
 32-0611 1.1mm (.042") 40-1211 (211)
2064 pressure
80
22
 32-0614 1.4mm (.055") 40-1214 (214)
2704 pressure
70
21
 22-1001 32-0618 1.8mm (.070") 40-1218 (218)
2765 pressure
80
22
 32-0818 1.8mm (.070") 40-1222 (222)
2777 pressure
70
23
 32-0622 2.2mm (.086")  
2797 pressure
70
21
    
2880 siphon
60
15
 Included    
2900 siphon
45
12
 22-1001
 
Model Air Cap P/S Inlet psi Fan Control SCFM Ring Fluid Nozzle Needle
L300C
 t t t 60-1500
t
 Included 33-0610 1.0mm (.040") 40-1310 (310)
2013* p & s
45-55
9-10.7
 33-0613 1.3mm (.052") 40-1313 (313)
2014* p & s
45-55
9-10.7
 33-0614 1.4mm (.055") 40-1314 (314)
2016* p & s
45-55
9-10.7
 33-0616 1.6mm (.063") 40-1315 (315)
 Actual fluid nozzle and air cap combinations are determined by application (see application chart)
 *Gun inlet pressures may vary as required by application

Spray Tech Systems, Inc. / 4631 NW 3rd Street / Oklahoma City, OK 73127      
Powder coat
P
Phone: 800.777.7729 or 405.948.8696 / Fax: 405.948.8160
info@spraytechsys.com
       Copyright© 2004, Spray Tech Systems, Inc. all rights reserved